Posted on 6 Comments

Work It: Edition 12

This is it! This is the last one of the year!!! AHHHHHHHHHHHH! Ok, I’m too excited about the entire outfit to wait to share. This month is all about the party! Whether it is a Holiday party, a New Year’s party, or an “I don’t have to work all week” party, December is a month of celebrations! I wanted to go full bold for this one.

Since this GORGEOUS scuba from Sly Fox Fabrics is so, so bold, I wanted to break it up a little bit by adding a side stripe, but also keep it pretty simple. But first, let’s talk about these fabrics. I used leftover modal from Edition 11 for this stripe. I cut so the more stable direction is running the length of my leg to prevent the less stable fabric from sagging in between the scuba. So far, it is holding up very well! The scuba is vibrant and just lovely to work with and wear. I could not be happier with how the finished pants wear.

On to the hacks. As always, I started with the 5 Out of 4 Diane Joggers. For these, I cut 1/2 inch off each outside edge, so I could have a 1 inch stripe. I cut the stripe at 1.75 inches and just did width of fabric, then cut off the excess after attaching. I also cut the regular, hemmed pants length, and the high rise. The knit band is still my favorite, and I added 2 inches to the cutting height, so it is 1 inch taller than intended in the pattern. When sewing, I did slim the leg slightly on the inseam side. The only other change is the pocket. This isn’t my usual pocket hack! I wanted more of a slanted slat pocket. So, I redrew the shape and deepened the pocket slightly. Because the opening goes further down my leg, I wanted to make sure my phone wouldn’t fall out while I was walking.

That’s it. This one was a SUPER simple hack. I adore the stripe and chose to do the pocket facing in black as well, which I think adds another lovely touch. The pocket lining is out of the scuba, since I wasn’t sure if the black would show through or not. These are comfortable and fun. Plus, I can see so much fun with a solid fabric and a lace stripe or a faux leather stripe. Just so much fun to be had!

So let’s talk about this top. Oh boy! This is the 5oo4 Stella and she is a beaut!! The flounce is what drew me in and adds that party vibe. I chose not to add the optional straps because I have cute bralettes to show off but love the bare shoulder if I feel like donning the strapless bra. This pattern is super versatile though! It has a plain tank, a strappy tank, and shorts! Plus, all of those can mix and match to make a romper! Definitely a great pattern to fill different needs in your wardrobe! Plus, it was a really quick sew.

I considered doing the bra length option only (forgot to list that one!), but opted for the more versatile tank. Mostly because this tank has just enough ease to tie it up and wear it a couple different ways!! If you want to do this, make sure to choose a fabric with great recovery! Something like rayon spandex is going to show that knot after it is untied until you wash it again.

I adore Stella in this SFF DBP. I picked one of the coordinates listed on the scuba. This magenta is currently sold out, but the orchid was my next choice and is still in stock! I can’t wait to make Stella in other colors and dive into some beautiful prints. I think this would be lovely in a lace or mesh as a swim cover!

That’s the whole outfit! It was simple and easy to make and wear! So comfortable and lovely. It also makes me think of spring, while everything around me is brown and a little sad, so double happy! I hope you enjoyed this month’s edition of Work It and be sure to share if you try it!!

Don’t forget to enter to win 5oo4 pattern credit right here (click this link! Really!! Prizes!!! Who doesn’t love winning prizes?!)

Posted on 2 Comments

5oo4 Knot Tee

One of the best parts of sewing is finding really fun, unique tops that ACTUALLY FIT BOOBS! If I saw a shirt like this at a store, I’d get quite excited at how cute it is, find my size, and head to the dressing room. I’d get it on, and my boobs would 100% be either smooshing out the top, or awkwardly split below the boobal area (that’s a word). If this is my problem, my sister has it WAY WORSE. I doubt she would even pick it up to try it on. Now that I make our wardrobes, she can have super cute tops that actually fit!! Crazy talk.

Let’s talk about this knot top. I know I’ve talked about it before, but I just adore it! So does Virginia! She has another one and was so excited for me to make a second one! It looks so complicated, but is super easy! The instructions are so clear and easy to follow, you’ll have a gorgeous new top (or dress!!) in no time.

One of my favorite parts of this top (and most of 5oo4’s patterns) is the included cup sizes on the bust pieces. If you’re well endowed, you can cut the right size pieces to get the coverage you need. If you’re less generously endowed, you won’t be swimming in fabric!

We made this out of this gorgeous double brushed poly from Sly Fox Fabrics. I don’t think it is available currently, but I HIGHLY recommend DBP for this top. It is so comfy and flattering and she just loves it!!! Check out the entire DBP from Sly Fox here!

Grab your copy and check out all of the amazing patterns from 5oo4! Don’t forget to share your version in the 5oo4 group!

Stephanie xx

Posted on 10 Comments

Work It: Edition 8

Summer is winding down, though it doesn’t always feel that way here in very warm Atlanta. The sister and I just spent a wonderful weekend in South Georgia and Florida. We visited friends and explored some lovely beaches and islands. And we played with some cute ass puppies!! But, it was also the perfect opportunity to try out this month’s edition of Work It: 12 Months, 1 Pattern, No Repeats!

These lovely shorts are such a simple hack, I can’t believe I haven’t tried it sooner. I really wanted to hit that luxury cruise look, but be super easy to wear! I just knew that this great jogger pattern would be so, so comfy in a woven. But they aren’t drafted for wovens!! So, break out the measuring tape and go to town!

I checked the finished measurements of the hips (that’s my widest) and compared it to my measurements. I wanted an inch and a half of ease, so I split the difference between the four leg pieces and added it in. I also adjusted the waistband the same amount. Since I added elastic to the waistband, it didn’t need to be fitted to my waist.

This Sly Fox Fabric Bubble Crepe was the perfect choice for this hack! It is breezy and comfortable. Light, but not see thru. And these colors are so vibrant. I was blown away when I saw it!!

Now, I couldn’t just do a woven hack, so I wanted to punch them up a bit more. Once they were sewn together except the waistband, but not hemmed, I laid the legs flat, and curved the hem up to toward the side seam. Then, I serged the edges of the hem, flipped up the serged edge and topstitched. But, of course, I had to add some gorgeous trim to this!

I just love the look of lace trim, but I almost always forget this is a fun option to add a little extra to my pieces! I started at the top of the side seam on the front side, and topstitched close to the edge of the wide lace I chose. I followed the curve along the side, then all the way around the hem. Once I made it back to the side seam, I trimmed the lace so it would just slip underneath the front layer. Then I finished topstitching the back of the side seam, making sure to catch the unfinished end underneath. Boom! Done and fancy!

But of course, I need a tank to walk the beach and be fabulous! The Virginia tank is just perfect!! Simple, easy, and cute. It doesn’t detract or distract in any way from the lovely shorts. And this Blue DBP is PERFECT!!! It is absolutely stunning. I’ve already blogged about it once and I’m so happy both Virginia and I got a cute new tank out of this one.

This is the first month where Virginia not only had to have something out of the same fabric, but wouldn’t let me wait to make her to monthly hack! So, bonus! I did the same hack for her!! She looks so dang cute in this combo! She was also really comfy while we wondered a lovely shopping area on the island after enjoying a few hours in the sun and sand.

Every month is my favorite month for this series, but these shorts are so fun and easy, we both definitely need a few more in our closets. Check out the rest of my favorites and let me know which one hits the high notes for you! And be sure to enter the Rafflecopter giveaway for a fabulous pattern from 5 Out of 4 Patterns!!

Stephanie <3

Posted on 2 Comments

5oo4 Lakeshore Tank

Tank tops, as a general term, are probably my most common sewn item. Both Virginia and I love wearing them. They’re easy for all weather, especially as a layering piece. So we can be work/event appropriate as needed, then lose some layers to get into sweltering cars or walk through that palpable humidity. Also, we are both about 5’8″ and blessed in the chest. All of this means tanks tend to be closer to a crop top than either of us prefer. This means making them is one of my favorite things because RTW tanks tend to be too short. Plus, they use such a small amount of fabric!

This means I’m always looking for fun, unique tanks to add to our closets! Oh boy is this a fun one!! It has a built in shelf, which is super easy to adjust for bust sizes if you need it. This constructions gives a really beautiful, clean finish to the front, which I completely love! There is extra elastic to help keep the shape and support. Plus, you have a couple options for height on the front, strap placement, and bottom finishes! I love options.

Overall, I’m pretty jealous of Virginia’s new tank and I’ll definitely need to make one for myself. We used this absolutely gorgeous blue double brushed poly from Sly Fox Fabrics and it is a stunning color. The DBP was super easy to work with and makes such lovely binding and straps, every dang time! Paired with some RTW shorts, I think she looks ready for just about any situation.

The entire ensemble was just perfect for wandering around Jekyll Island and looking good doing it! We had some overcast skies and drizzles throughout the day, then a complete downpour, but that came later. For our quick wade in the surf and exploration of the dunes (we found a protected turtle nest!!!), she was comfortable, cool, and looked damn good.

Basically, this is a wonderful edition to her closet, I’m going to steal it soon. Don’t tell. Grab your copy of the Lakeshore Tank and sew up ALL THE TANKS. Before summer ends.

Stephanie xx

Posted on 9 Comments

Work It: Edition 5

It is time again for another edition of Work It: 12 Months, 1 Pattern, No Repeats! This month is particularly exciting for me and I have been impatiently waiting to share! I’ve got front pockets, of course, a new fabric for me, and not one, but two new hacks to share!!!

Of course, I am sharing another version of the 5 Out of 4 Patterns Diane Joggers. Check out all the previous editions (and of course, keep an eye out for the rest!) to see just how versatile this pattern really is! And once again, some FABULOUS Sly Fox Fabrics are just bringing this entire outfit together. This was my first time using techno crepe and I am completely in love with it! It is the perfect fabric for work wear. Cool, skims over the bits we don’t want to show off in the office, wrinkle free, plus, it is super easy to work with!! I went for the red, which is on sale right now, and just perfect for a bright happy day for the office!!

Since I’m rocking another work pant this month, of course I included the front pockets from Edition 3, because pockets. But I also slimmed down the legs on the version to create more of a cigarette pant! I love it!! All I did was increase seam allowance slowly from just below the hips to the ankle. I kept that 3/8 inch seam allowance through the hips because the fit through the hips is perfect for me, but hit 5/8 inch seam allowance about mid thigh and the rest the way down. My ideal slim fit pant!!

But wait, there’s more!! (Sorry, I just can’t resist!). I also added welt pockets to the back!! Seriously, every pant needs more pockets. I rarely use back pockets at work, but having the options to throw a wrench in the back pocket while working on an instrument is just so convenient! Plus, I find welt pockets to be beautifully magical when they come together!

All I needed were two extra rectangles for this one! One to create the welt piece and one for the pocket bag. I used similar placement as the top of the pocket bag in Edition 2 to determine where to place the welt. Then I added featherweight iron-on interfacing over where I’ll sew. This is enough stabilization for the light use I intend for my back pockets. If you’re going to use your pocket a lot, I recommend at least lightweight interfacing.

This is a great summary of how to install a welt pocket with details and photos of each step. But you can use any tutorial you like! It is totally worth the effort to add these. Just take your time in marking placement. It will be super obvious if they are crooked or at different heights. Add these first, then follow the rest the steps as usual to get some kick-ass work pants!

Of course I needed an equally kick-ass shirt to go with it! One of my favorite patterns is the Gloria. I fell completely in love with the dress version and have wanted a simple peplum every since. This was the perfect opportunity for that! I used this fantastic DBP that matches these pants perfectly!! It is perfectly flowy and delightful! I love it!! The only pattern changes I made were adjusting for height. Super easy and a sassy, fun shirt for work, or date night!

Check out all the amazing offerings from Sly Fox and 5oo4. And enter right here to win a free 5oo4 pattern!! Be sure to share your own versions of Gloria and Diane! I love seeing what you make!

Stephanie xx